Primary Elements of Swimming Pool Maintenance

Man cleaning the swimming pool

Swimming pools are now a primary element of exterior spaces. They were only for the rich in years past, but there are currently different technologies that have enabled their inexpensive installation. Although they can guarantee you fun for years, they can also become the primary source of contaminants in your property. These will be the cause of several unexplained infections among your family members and guests.

Moreover, the contaminants will necessitate costly pool repair handled by a professional in Keller, Texas. Some of the common sources of pool contaminants are pets, debris, and the people using your pool. You can do only so much to negate some of these contaminant sources. With proper maintenance, however, your pool water will remain clear and safe for its users. Here are the primary elements of professional swimming pool maintenance:

Filtration

Your pool water will be pumped through filters to remove particles and debris. These should be periodically cleaned to get rid of the particles they trap and keep them working optimally. Most filtration systems cannot handle the filtration of all the debris in your swimming pool. They are thus generally used in combination with other maintenance systems.

Chlorination

Chlorine is a chemical used for the disinfection of water and removal of debris through their dissolution. A chlorine stabilizer is often used to extend the chemical’s half-life so that you will need less chlorine and have a longer filtration cycle. Moreover, this is ideal for preventing the harsh effects of excess chlorine in your pool water. The chlorine amount and concentration needed depend on your water temperature and level, the number of swimmers, and the filters and pump system you use.

pH Level Maintenance

Swimming pool maintenance of pH level

The ideal pH level for swimming pools is between 7 and 7.6. Anything higher than this will place the swimmers using your pool at risk of developing skin rashes. A pH level lower than 7 will sting the swimmers’ eyes. Heavy rain, a high number of swimmers, and the use of multiple pool chemicals will affect your swimming pool’s pH. The total alkalinity is closely connected to the pH level. If your pool’s total alkalinity is low, the pH level will also be low and at times unstable. An unstable pH level will cause the deterioration of your pool’s painted surfaces and concrete.

Water Softness Maintenance

A high level of calcium dissolved in your water will leave scum on your pool’s surfaces, while a low level will cause the deterioration of your pool’s surfaces. The calcium level in your pool water will be continually monitored. In places with hard water, a water softener will be introduced to the water to soften it. In case the calcium levels are too low, your maintenance expert can recommend the periodic addition of calcium ions.

Building your swimming pool is only the initial step toward enjoying time in the water and hosting parties in it. Without the maintenance procedures mentioned above for your pool, it will become a health hazard and a costly structure in your property that you would rather do without. While there are several articles on handling your pool maintenance, this is best left to an expert to ensure that the chemicals do not harm you.